For Use with OKI Laser Printer ONLY.
The high resolution and great color quality comes out beautifully when printed on heat transfer papers.
It is easy to use and already available at most shops so there's no need to purchase any other equipment.
Forever Transfer OKI Laser Paper for Dark Garments is the ideal choice for both one of a kind personalization and high volume production.
Forever Transfer OKI Laser Paper for Dark Garments is manufactured to the highest quality standards for use in commercial production environments.
Use Forever Transfer OKI Laser Paper for Dark Garments to imprint on cotton, polyester, cotton/poly blends and are available in 8.5" x 11" and 11" x 17" sizes.
PRINT
Print your design in MIRROR IMAGE MODE ontoe the MATTE SIDE of the A-Foil.
HEAT PRESS
Place the A-Foil in the middle of the lower plate (printed side FACING UP)
Place the B-Paper on top of the A-FOIL (coated side FACING DOWN)
Cover with a sheet of SILICONE or BAKING PAPER (parchment)
Note: the B-paper should be cut slightly smaller than the A-Foil. This prevents your transfer press from becoming dirty.
TRANSFER B-PAPER to A-FOIL
Press the A-Foil and B-Paper together at 300°F (150°C) for 90 seconds at medium pressure.
Separate the B-Paper from the A-Foil without lifting them up from the lower plate of your heat press.
Work in a SLOW, LOW & FLUID MOTION.
Cut around your design to remove the coating frame caused by the bleeding of the B-Paper.
APPLICATION
Place the textile or another substrate on the lower plate of the heat press.
Press at 300°-320°F for cotton for 30 sec. at medium pressure.
Press at 248° - 266°F for Polyester and Polyester Blends for 30 sec. at medium pressure.
Peel cold.
FIXING
It is important to REPRESS the transfer properly to soften the touch and increase the washability.
Press at 300°-320°F for cotton for 30 sec. at medium pressure.
Press at 248° - 266°F for Polyester and Polyester Blends for 30 sec. at medium pressure.