Print and Cut Full-Color Designs That Sparkle!
If you like the look and feel of Sparkle™ Heat Transfer Vinyl then you’re going to love full-color images on SparklePrint™! This silvery white film is embedded with silver specks of glitter that are encapsulated to create a smooth surface without any rough texture, so your prints are always soft and sparkly. The bright and shiny finish makes images pop with a pearly glow. Your designs and logos will look better than ever when printed on SparklePrint Digital Media! Please keep in mind that when you print anything that is spec'd as white, the white color will actually be the vinyl color which is a sparkly silver/white color (unless your printer supports opaque white). Please see our unicorn image as reference.
SparklePrint is approximately 190 microns/7.48 Mils, and is a PU composition. Comes in 15", 20" width and 29.5" width. (Please note that the 30"width selection is actually 29.5")
Can be applied to 100%cotton, 100% polyester, Cotton/Poly blend, Spandex and Lycra®
For use with Exo-Solvent Ink, Solvent Ink and Latex Ink. Not compatible with Inkjet, toner, or sublimation printers.
Print & Cut Instructions
• Print (do not mirror), cut (60° blade is recommended), and weed design
• Mask with TTD Easy Mask or TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Cover Design with HTV cover sheet
• Apply design at 311°F / 155°C (most fabrics)
• Use medium pressure for 15 seconds
• Peel carrier hot
Wait 24 hours before first wash
Machine wash cold / mild detergent
Dry with low dryer setting or hang dry
Do not dry clean, bleach or use fabric softener